Table of Contents
Getting your motorcycle ready for custom graphics at Atomik Falcon Studios is an exciting process that ensures your bike looks fantastic and the artwork lasts for years. Proper preparation not only enhances the visual appeal but also protects your motorcycle’s surface during the application process.
Step 1: Clean Your Motorcycle Thoroughly
Start by washing your motorcycle to remove dirt, grease, and debris. Use a gentle motorcycle-specific cleaner and soft cloths or sponges. Pay special attention to areas where the graphics will be applied, ensuring a smooth, clean surface for optimal adhesion.
Step 2: Remove or Cover Sensitive Parts
If possible, remove parts like mirrors, lights, or decals that could interfere with the graphics. Cover areas that should not be painted with painter’s tape or masking paper. This prevents accidental overspray and ensures a clean application.
Step 3: Sand and Smooth the Surface
Lightly sand the areas where the graphics will be applied using fine-grit sandpaper (around 400-600 grit). This creates a slightly rough surface that helps the adhesive bond better. Wipe away any dust with a clean, damp cloth and let it dry completely.
Step 4: Apply a Primer if Needed
Depending on your motorcycle’s paint and the type of graphics, applying a primer can improve adhesion and color vibrancy. Consult with Atomik Falcon Studios for specific recommendations based on your bike’s material.
Step 5: Final Inspection Before Application
Inspect the prepared surface closely. Ensure it is clean, smooth, and free of dust or grease. A well-prepared surface guarantees that your custom graphics will look sharp and last longer.
Conclusion
Proper preparation is key to achieving stunning results with your custom graphics at Atomik Falcon Studios. Taking these steps ensures your motorcycle’s surface is ready for high-quality application, making your bike stand out on the road.